Yes! Invincibowl is a direct replacement to traditional glass bowls (14mm) and will fit snugly into your existing setup.

Our bowl has the same thermal capacitance as glass, which essentially means it can absorb and release the same amount of heat. The stainless-steel sleeve is where the consumer will engage the flame. This portion of the device provides an insulating layer between the flame and the aluminum bowl — this insulating layer (the stainless-steel insert) is crucial in our design, allowing you to flip your bowl over entirely and tap out the ash.
With substantial use, a glass bowl can become quite hot. Our bowl is no different. Though it will not heat up as much as a glass bowl, it will get hot with rapid smoking. Fortunately, we have an insulated handle that protects the user from the heat of the bowl.
Always be careful when handling any product which has had heat applied.
Significant heat build-up can happen with extended flame application.
Intended for use with pocket lighter.

Invincipole is the perfect downstem featuring the world’s first Telescoping Technology, extending from 3 inches – 5 ¾ inches and fitting a wide range of commonly distributed bongs. This 18mm/14mm joint fitting downstem is crafted from an aerospace-grade aluminum module with a full-body hard-anodization and comfortably admits any 14mm bowl. Invincipole also features a multi-hole diffuser, which houses the final ash defense system, our proprietary stainless-steel screen.

Invincipole is made to accommodate a wide variety of bongs. The 18mm/14mm joint fitting downstem easily extends from 3 inches to just under 6 inches! And of course, all our products are flawlessly tailored to fit one another.

Constant use of a bubbler or bong will add carbon residue and plant matter deposits (alkanes, esters, and other alcohol remnants) to your bong water. The bubbling action of the bong can aerate the deposits, attaching them to moisture particles that travel into your lungs when smoking. Using a captured screen will significantly reduce the material deposited into your bong water, giving you a cleaner smoking experience.

Generic screens either burn to a crisp or become so loaded with tar that you cannot smoke and are forced to replace it after only a few uses. Our proprietary screens permit over 20+ bowl packs before they need replacing, keeping glassware cleaner for longer. There are tons of alternatives, but none that work as well. Traditional brass screens have been around for decades; yet, they are quick to degrade since brass has a relatively low melting point. Brass also releases pollutants such as zinc and copper, which will contaminate your smoking experience. Glass or quartz screens, although reusable, require tons of patience as tenacious cleaning and gentle handling are required.

Our proprietary stainless-steel mesh introduces a high-flow shield that does not easily obstruct, calmly serving an even burn with no product loss.

Every single unit includes spare screens.

Our rule of thumb is when you are ready to give your bong a bath, you’re probably ready to swap your screens too. Both devices easily come apart for thorough cleaning.
Click HERE for Invincibowl cleaning
Click HERE for Invincipole cleaning
We advise only using Isopropyl and salt to clean your devices!

Invincibowl is warrantied against manufacturer defects and is intended to sustain drops from up to 10 feet onto solid surfaces.

See more about our warranty here: Invincibowl Device Warranty

See more about our return policy here: Invincibowl Return Policy

Invincibowl is completely safe to use and will not deliver any aluminum into your lungs. We have done extensive evaluation and produced three proofs to support this fact.

PROOF #1: TEMPERATURE
Aluminum, like virtually all materials, has three states of matter, solid, liquid and gas; think of ice, water and steam.

The hottest point of a pocket lighter’s flame can reach 1970˚C.  SOURCE

The hottest point of a mini-torch’s flame can reach 1430˚C.  SOURCE

At normal environmental temperatures aluminum is in its solid state. It turns to molten liquid at 660 ˚C and turns to gaseous vapor at 2470˚C.  SOURCE  

Since neither a lighter or a mini-torch can produce the temperatures needed to convert aluminum to a gas at atmospheric pressure, even at 10,000ft elevation, there is no way for vaporized particles to be released.

Additionally, the Invincibowl would need to transition from solid, through liquid phase and into a gas phase. We have hundreds of videos and have run dozens of experiments proving, without a doubt, that the Invincibowl does not form molten metal when used.

PROOF #2: MASS
The Invincibowl has a mass of 16,000mg

The average person consumes 10mg of aluminum per day in their food, water and air intake SOURCE

The Law of Conservation of Mass states that matter can neither be created or destroyed.  SOURCE

At 10mg/day the Invincibowl would completely vanish after roughly 4 years of usage. This does not happen,  the Invincibowl's mass remains exactly the same, proving that all of the aluminum atoms remain fixed to the product.

PROOF #3: COATING
The Invincibowl is coated with a layer of hard anodization. This not only gives it cool colors, but provides a 1-mil (about a ¼ thickness of your hair) protective layer which can withstand temperatures up to 2000˚C.  SOURCE

After continual usage and hundreds of heating cycles, the anodized coating remains fully intact. Since the anodized coating is intact, and incredibly thin, we can conclude that no material is being shed, no aluminum is being released. 

BACKGROUND ON ALUMINUM
Aluminum is one of the most abundant metals in mother nature’s crust. Aluminum compounds can be found in trace amounts in all sorts of everyday items such as antacids, cosmetics, sunscreens, and as we mentioned before, in the food, water and air that you ingest.

Agency for Toxic Substances & Disease Registry, CDC

US National Library of Medicine, NIH 

The connection between aluminum and Alzheimer’s is complicated and widely misunderstood. Varying factors contribute to the disease including organ health, neuro-inflamation, neurofibrillary tangles, and several others. It is not even understood if the disease itself is what causes accumulation of different elements in the brain or vice versa.
 
Metal foundry workers who ingest significant amounts of aluminum, on the order of 1000mg/day, over long periods of time, have been shown to suffer neurological effects. For this reason we highly recommend you not eat your Invincibowl (1600mg)

Aluminum, metals and dementia 

Influence of crucial risk factor to developing Alzheimer disease

Understanding Aspects of Aluminum Exposure in Alzheimer’s Disease Development